表 发表文章情况简介
|
序号 |
论文题目 |
期刊 |
年份 |
期（卷) |
作者 |
|
1 |
Hybrid Laser-Metal Inert Gas Welding of Al–Mg–Si Alloy Joints: Microstructure and Mechanical Properties |
Materials and Design |
2014 |
61 |
|
|
2 |
Characteristics of microstructure and fatigue resistance of hybrid fiber laser-MIG welded Al-Mg alloy joints |
Applied Surface Scienc |
2014 |
298: |
Shaohua Yan, Yuan Nie, Zongtao Zhu, Hui Chen, Guoqing Gou, Jinpeng Yu, Guiguo Wang
|
|
3 |
Plastic behavior of AZ80 alloy during low strain rate tension at elevated temperature |
Materials Science & Engineering A |
2014 |
6(12) |
L.B. Ren, J. Wu, G.F.Quan |
|
4 |
Tensile and compressive creep behavior of extruded Mg–10Gd–3Y–0.5Zr (wt.%) alloy |
Materials Characterization |
2015 |
（99） |
H. Wang, Q.D. Wang, C.J. Boehlert, D.D. Yin, J. Yuan |
|
5 |
Process and Property of Superplastic Mould Forged AZ80 Wheel Hub |
Materials Science Forum |
2014 |
（788） |
G.F.Quan, L.B. Ren |
|
6 |
Microstructure and tensile properties of thixo-diecast AZ91D magnesium alloy |
China Foundry |
2013 |
10(5) |
X.L. Ai, G.F. Quan, Z.MLiu,H. Gao |
|
7 |
Effect of hot extrusion process on microstructure and properties of wide and hollow AZ31 magnesium alloy profiles |
Advanced Materials Research |
2013 |
(710) |
J.GLv, G.F.Quan, R.C. Li, C.Y Shi, Y.B. Zhang, X.A.Xie |
|
8 |
Comparative study on compression deformation behaviors of cast and extruded AZ31 alloys |
Advanced Materials Research -Advances in Materials and Materials Processing |
2013 |
652-654 |
Song Jiatong; QuanGaofeng; Liu Zhaoming; Zhang Yingbo; Sun Jiale |
|
9 |
Elevated-temperature impact toughness of Mg-(Gd, Y)-Zr alloy |
Scripta Mater. |
2013 |
68 |
Y.L. Mu, Q.D. Wang, M.L. Hu, V. Janik, D.D. Yin |
|
10 |
Corrosion behavior of thermal sprayed WC cermet coatings containing metallic binders in saline environment |
Transactions of Nonferrous Metals Society of China |
2013 |
23： (9) |
Li-jun WANG, Pei-xian QIU, Yan LIU, Wu-xi ZHOU, Guo-qing GOU, Hui CHEN |
|
11 |
Creep behavior of Mg-9Gd-1Y-0.5Zr (wt.%) alloy piston by squeeze casting |
Material Characterization |
2013 |
78 |
J. Yuan, Q.D. Wang, D.D. Yin, H. Wang, C.J. Chen, B. Ye |
|
12 |
Effect of Pre-strain on Fatigue Behaviour of AZ31 Mg alloy |
Materials Science Forum |
20 12 |
706-709 |
GaofengQuan, Yingbo Zhang |
|
13 |
The FEM Analysis for Magnesium Alloy Honeycomb Panel |
Advanced Materials Research |
20 12 |
335-336 |
XiueGu, GaofengQuan |
|
14 |
Magnesium Alleys-New Materials for High-Speed Train with Reduced Libration and Noise |
Proc. of the IWHLR |
20 12 |
148(2) |
GaofengQuan, Ruichun Li, XiueGu, and Zhaoming Liu |
|
15 |
Creep and fracture behavior of peak-aged Mg-11Y-5Gd-2Zn-0.5 Zr (wtpct) |
Metall. Mater.Trans. A |
2012 |
43 |
D.D. Yin, Q.D. Wang, C.J. Boehlert, V. Janik |
|
16 |
Creep behavior of Mg-11Y-5Gd-2Zn-0.5Zr (wt.%) at 573K |
Materials Science & Engineering A |
2012 |
546 |
D.D. Yin, Q.D. Wang, C.J. Boehlert, V. Janik, Y. Gao, W.J. Ding |
|
17 |
Creep and fracture behavior of as-cast Mg-11Y-5Gd-2Zn-0.5Zr (wt.% |
J MATER SCI |
2012 |
47 |
|
|
18 |
Dry sliding wear behavior of Mg-10Gd-3Y-0.4 Zr alloy |
MATER DESIGN |
2012 |
42 |
M.L. Hu, Q.D. Wang, C.J. Chen, D.D. Yin, W.J. Ding, Z. Ji |
|
19 |
Research on Corrosion Behavior of A6N01S-T5 Aluminum Alloy Welded Joint for High-speed Trains |
Journal of Mechanical Science and Technology |
2012 |
26(5) |
Guoqing Gou*, NanHuang, Hui Chen, Hongmei Liu, Aiqin Tian, Zhicheng Guo |
|
20 |
Evaluation on Vibration Property of Magnesium Honeycomb Panels |
Materials Science Forum |
20 11 |
686 |
GaofengQuan, Zhaoming Liu and XiueGu |
|
21 |
Microstructures and Mechanical Properties of Mg-Al-Zn-Y alloys |
Advanced Materials Research |
20 11 |
311-313 |
Yingbo Zhang, Hong Gao, GaofengQuan, Zhaoming Liu |
|
22 |
Effect of Ti addition on the Microstructure and mechanical properties of cast AZ91 Magnesium alloy |
Advanced Materials Research |
20 11 |
l189-193 (5) |
X.L. Ai, G. F. Quan, J. Yang, Z.M. Liu |
|
23 |
Evaluation on Vibration Property of Magnesium Honeycomb Panels |
Materials Science Forum |
20 11 |
680 |
GaofengQuan, Zhaoming Liu, XiueGu |
|
24 |
Microstructure and mechanical properties of Mg-3Y binary alloy processed by cyclic extrusion and compression |
Materials Science Forum |
20 11 |
667-669 |
X.T. Liu, M.P. Liu, Q.D. Wang, W. Guo, D.D. Yin |
|
25 |
The elevated-temperature mechanical behavior of peak-aged Mg-10Gd-3Y-0.4Zr alloy |
Materials Science & Engineering A |
20 11 |
528 |
V. Janik, D.D. Yin, Q.D. Wang, S.M. He, C.J. Chen, Z. Chen, C.J. Boehlert |
|
26 |
Applicability of Mg-Zn-(Y, Gd) Alloys for Engine Pistons |
Magnesium Technology |
20 11 |
|
K. Okamoto, M. Sasaki, N. Takahashi, Q.D. Wang, Y. Gao, D.D. Yin, C.J. Chen. |
|
27 |
Effects of heat treatments on microstructure and mechanical properties of Mg-11Y-5Gd-2Zn-0.5Zr (wt.%) alloy |
J ALLOY COMPD |
20 11 |
509 |
D.D. Yin, Q.D. Wang, Y. Gao, C.J. Chen, J. Zheng |
|
28 |
Influence of thermal and thermo-mechanical processing on the creep resistance of Mg-10Gd-3Y-0.4Zr Alloy |
Materials Science Forum
|
20 11 |
675-677 |
V. Janik, Q.D. Wang, D.D. Yin, W.J. Ding |
|
29 |
New Materials for High Speed Train with Reduced Vibration and Noise |
Magesium Alloys, Proceedings of 7 th World Congress on High Speed Rail |
20 10 |
|
Gaofeng QUAN, Ruichun LI, Xiue GU, Zhaoming LIU |
|
30 |
Sound Insulation Study on Mg sheet and Mg Honeycomb Panels |
Materials Science Forum |
20 10 |
654-656 |
GaofengQuan，Zhaoming Liu, Yingbo Zhang |
|
31 |
Analysis of the Microstructure and Thermal Shock Resistance of Laser Glazed Nanostructured Zirconia TBCs |
Journal of Thermal Spray Technology |
2010 |
19（3） |
Hui Chen*, Yunfei Hao, Hongying Wang, and Weijie Tang |
|
32 |
Research on the Friction and wear behavior at elevated temperature of plasma sprayed nanostructured WC-Co coatings |
Journal of Materials Engineering and Performance |
2010 |
19（1） |
Hui Chen*, Guoqing Gou, Mingjing Tu, Yan Liu |
|
33 |
Characteristics of Nano Particles and Their Effect on the Formation Of Nanostructures in Air Plasma Spraying WC-17Co Coating |
Surface & Coatings Technology |
2009 |
203 |
Hui Chen*, Guoqing Gou, Mingjing Tu, Yan Liu |
|
34 |
Structure and wear behavior of nanostructured and ultra-fine HVOF WC-17Co coatings |
Surface Engineering |
2009 |
25(7) |
Hui Chen*, Guoqing Gou, Mingjing Tu, Yan Liu |
|
35 |
Development of Spot Weld Failure Parameters for Full Vehicle Crash Modeling |
Science and Technology of Welding & Joining, |
2013 |
Vol. 18, No. 3, |
Y.P. Yang; J. Gould; W. Peterson; F. Orth; P. Zelenak; W. Al-Fakir, |
|
36 |
Complex-Panel Weld Shrinkage Data Model for Neat Construction Ship Design Engineering |
Journal of Ship Production and Design |
2014 |
30(1) |
Y.P. Yang*, H. Castner, R. Dull, J. Dydo, T.D. Huang, D. Fanguy, V. Dlugokecki, and L. Hepinstall |
|
37 |
Effect of Al on the microstructure and impact property of the surfacing repair layer of the rail |
Surface Engineering |
2012 |
28(7) |
Da Li*, Guoqing Gou, Yan Liu, Tenghui Zhu, Hua Ji, Hui Chen |
|
38 |
Phase Transformation Behavior of the SMA490BW Weathering Steel |
Phase Transition |
2012 |
85(6) |
Da Li*, Yuan Nie, Guoqing Gou, Yan Liu, Yonghui zhu, Qiuying Wang |
|
39 |
Microstructure and property of Friction Stir Welding Joint of 7075Al and AZ31BMg |
Journal of Shanghai Jiao tong University |
2012 |
17(6) |
Li Da*, Cui Zhanquan, Yang Qingxiang, Sun Bing, Sun Ming-hui |
|
40 |
Effects of RE oxide on the microstructure of hardfacing metal of the large gear |
Material Science and Engineering A |
2009 |
509(1-2) |
Da Li, Yulin Yang, Ligang Liu, Jiazhen Zhang, Qingxiang Yang |
|
41 |
Phase diagram calculation of high chromium cast irons and influence of its chemical composition |
Materials & Design |
2009 |
30(2) |
Da Li, Ligang Liu, Yunkun Zhang, Chunlei Ye, Xuejun Ren, Yulin Yang, Qingxiang Yang |
|
42 |
Process stress simulation of medium-high carbon steel after hard-face-welding during martensite transformation |
Computational Materials Science |
2008 |
44(2) |
Da Li*, Bo Liao, Ligang Liu, Chunmei Zhao, Xiqing Zhao, Xuejun Ren, Qingxiang Yang |
|
43 |
高速列车用6061和7N01铝合金焊接接头断裂韧性分析 |
焊接学报 |
2014 |
35：(9) |
吴影; 陈辉; 苟国庆; 于金朋; 车小莉; 王志海 |
|
44 |
一种铁路辙叉用贝氏体钢的焊接热模拟 |
焊接学报 |
2014 |
35（10） |
王秋影; 陈辉; 胡智博; 江超; 李达 |
|
45 |
高速列车车体铝合金抗应力腐蚀性能 |
西南交通大学学报
|
2013 |
48(3) |
江超; 陈辉; 王晓敏; 马纪军; 李恒奎 |
|
46 |
高速列车A6005A铝合金焊接接头断裂韧性研究 |
材料科学与工艺 |
2013 |
21(2): |
江超; 陈辉; 车小莉; 苟国庆; 马纪军 |
|
47 |
半固态等温热处理对挤压态AZ91镁合金微观组织的影响 |
稀有金属材料与工程 |
20 14 |
44 |
王栋, 刘兆铭, 张英波, 权高峰 |
|
48 |
AZ80镁合金半固态组织的等温演化研究 |
特种铸造及有色合金 |
20 14 |
34(9) |
孙兵，张英波，权高峰，李彬 |
|
49 |
AZ80镁合金模锻汽车轮毂组织与性能研究 |
材料化学前沿 |
20 14 |
2 |
吴婧，任凌宝，权高峰，张英波 |
|
50 |
AZ80镁合金半固态等温处理过程中的组织演变 |
稀有金属材料与工程 |
20 14 |
44 |
孙兵，张英波，权高峰，李彬 |
|
51 |
镁合金中空薄壁型材的脉冲MIG焊 |
电焊机 |
20 13 |
17(7) |
李欣，权高峰，张英波，吕建刚 |
|
52 |
等离子喷焊镍基合金耐磨性能研究 |
电焊机 |
20 12 |
45(5) |
孙兵权高峰李达. |
|
53 |
植物纤维镁合金夹层板的制备和力学性能 |
机械工程材料 |
20 12 |
36(2) |
王刚，权高峰，谷秀娥. |
|
54 |
等离子喷焊镍基合金耐磨性能研究 |
电焊机 |
2012 |
45(5) |
孙兵权高峰李达. |
|
55 |
工艺参数对Al-Mg搅拌摩擦焊焊缝成形质量的影响 |
焊接学报 |
2011 |
32(8) |
李达, 孙明辉, 崔占全 |
|
56 |
稀土氧化物及合金元素对堆焊熔敷金属显微组织的影响 |
焊接学报 |
2010 |
31(1) |
李达*, 杨育林, 刘利刚，杨庆祥 |
|
57 |
高耐磨药芯焊丝堆焊组织及基体选择 |
焊接学报 |
2009 |
30(12) |
李达*, 杨庆祥, 崔占全, 杨育林 |
|
58 |
植物纤维镁合金夹层板的制备和力学性能 |
机械工程材料 |
20 12 |
36(2) |
王刚，权高峰，谷秀娥. |
|
59 |
工艺参数对Al-Mg搅拌摩擦焊焊缝成形质量的影响 |
焊接学报 |
2011 |
32(8) |
李达, 孙明辉, 崔占全 |
|
60 |
镁合金蜂窝板隔声性能分析 |
噪声与振动控制 |
20 11 |
31(4) |
谷秀娥，权高峰，石琳 |
|
61 |
挤压比对镁合金宽幅挤压的影响 |
兵器材料科学与工程 |
20 11 |
34(3) |
孔祥峰，权高峰，杨超凡 |
|
62 |
镁合金疲劳性能的研究现状及展望 |
机械工程材料 |
20 10 |
|
张爱民，权高峰 |
|
63 |
喷涂工艺对Fe-Ni-B喷涂涂层组织性能的影响 |
材料科学与工艺 |
2010 |
18（1） |
陈辉*, 苟国庆,涂铭旌 |
|
64 |
等离子喷涂纳米WC-17Co涂层高温磨损性能 |
焊接学报 |
2008 |
29（12） |
陈辉*, 苟国庆, 刘艳, 涂铭旌 |
|
65 |
等离子喷涂WC-Co纳米涂层形成及强韧化机理 |
西南交通大学学报 |
2008 |
43（5） |
陈辉*, 苟国庆, 刘艳, 涂铭旌 |
|
66 |
基于RBF神经网络的钢轨交流闪光焊焊接接头灰斑面积预测 |
焊接学报 |
2008年2月 |
29（2） |
吕其兵,谭克利，骆德阳 |
|
67 |
多路弧焊过程参数单片机采集系统的设计与实现 |
电焊机 |
2014年6月 |
6期 |
钟剑文，张翔，严栋，张曦，吕其兵 |
|
68 |
基于总线的移动式钢轨闪光焊机控制系统 |
电焊机 |
2012年6月 |
6期 |
吕其兵、贺颂、戴晓纲 |